Humid Hide for Reptiles with Integrated Hygrometer/Thermometer for Shedding Support

Bring smart humidity control and thoughtful reptile care to your enclosure with this Humid Hide. Designed with a built-in hygrometer/thermometer and a removable moisture compartment, this hide creates a monitored humid micro-environment, without forcing your reptile to sit directly on wet substrate.

Perfect for shedding support, humidity management, and clean enclosure aesthetics, this hide balances function and simplicity because your reptile deserves both.

🧪 Unique Features:

• 🌡 Integrated Hygrometer/Thermometer
  Temperature and humidity readings are displayed directly on the front of the hide — no loose probes, no visible wires, and no disturbing your reptile to check conditions.

  • Temperature Range: -58°F to 158°F | Precision: ±2°F
  • Humidity Range: 10%–99% RH | Precision: ±5% RH
  • Updates every 10 seconds
  • Gauge pops out internally for easy battery replacement

• 📦 Three-Piece Construction

  • Base Hide - cozy and secure resting chamber
  • Removable Moss Compartment - holds damp moss above your reptile
  • Lift-off Lid - traps humidity and completes the hide look

• 🌬️ Health-Conscious Design
  The moss tray suspends moisture above your reptile, helping create a humid microclimate below - reducing direct contact and the risk of scale rot.

• 🧷 Safe & Durable
  Made with strong, moisture-resistant PETG and designed with smooth, rounded edges. No sharp parts - just safe, cozy comfort.

• ✍️ Optional Custom Text on the Lid
  Make it uniquely yours by adding custom text to the top of the hide.

  • Add your reptile’s name
  • Memorial text
  • Fun phrases
  • Enclosure labels
  • Anything meaningful to you

  Your text will be cleanly printed into the lid for a professional, seamless look. Simply enter your desired wording and preferred text color in the personalization box when ordering.

📦 What’s Included

• 3D Printed Humid Hide (PETG)
• Integrated Hygrometer/Thermometer
• x2 LR44 batteries (pre-installed)

📏 Available Sizes

Each size is measured in both inches and millimeters for accuracy:

🔸 Small

• Inner Space: 5.51in L × 4.33in W × 2.25in H (140mm × 110mm × 57.15mm)
• Entrance: 1.97in W × 1.89in H (50mm × 48mm)
• Overall Dimensions: 5.83in L × 4.65in W × 2.41in H (148mm × 118mm × 61.15mm)

Best for:

• Hatchlings or small-bodied reptiles up to ~1.5 ft (45 cm)

🔸 Medium

• Inner Space: 7.87in L × 7.00in W × 2.75in H (200mm × 177.8mm × 69.85mm)
• Entrance: 2.44in W × 2.36in H (62mm × 59.94mm)
• Overall Dimensions: 8.19in L × 6.92in W × 2.91in H (208mm × 175.75mm × 73.85mm)

Best for:

• Juveniles or medium-bodied species up to ~2.5–3 ft (75–90 cm)

🔸 Large

• Inner Space: 9.06in L × 8..18in W × 3.15in H (230mm x 207.75mm × 80mm)
• Entrance: 2.75in W × 2.55in H (69.85mm × 64.77mm)
• Overall Dimensions: 9.37in L × 8.49in W × 3.31in H (238mm × 215.75mm × 84mm)

Best for:

• Larger reptiles up to ~4 ft (120 cm)
• Great for ball pythons, colubrids, or reptiles that prefer extra space

🔸 Extra Large

• Inner Space: 12.00in L × 8.35in W × 3.15in H (304.8mm × 212mm × 80mm)
• Entrance: 3.50in W × 2.76in H (88.9mm × 70mm)
• Overall Dimensions: 12.31in L × 8.66in W × 3.31in H (312.8mm × 220mm × 84mm)

Best for:

• Large-bodied reptiles over ~4 ft (120 cm)
• Species that need generous length and a wider entrance

📝 Tip:
If your reptile is near the upper limit of a size range, consider sizing up - especially during shedding cycles when a bit of extra humidity and room goes a long way!

💡 How It Works

1. Add damp sphagnum moss or your preferred moisture-holding material to the inner tray.
2. Replace the lid with the bow to trap moisture inside the hide.
3. Position the hide on the cooler side of your enclosure for best results.

Humidity levels may vary depending on enclosure size, ambient room conditions, and the moss or substrate used.

⚠️ Important Note for Extra Large Size

Because of its overall dimensions, the Extra Large is printed in multiple sections and professionally assembled.

The sections are aligned using precision 3D-printed internal connectors, secured with industrial adhesive, and reinforced along the seam using plastic welding for added strength and durability.

• Structurally solid and fully functional
• Seam is visible but color-matched to blend with the piece
• Strength and safety are not affected

The seam is a normal part of producing larger prints and does not impact performance. We believe in full transparency, so you know exactly what to expect. There are pictures in the listing photos that show what these seam lines look like.

❗ Important Notes

• This hide is not intended to be submerged in water.
• Custom colors may vary slightly from what’s shown due to screen differences and filament batch variations.
• Personalized items are made specifically for you and are not eligible for returns unless defective.

⚠️ 3D Printing Disclaimer:

This item is individually 3D printed, making each hide truly one of a kind! While we work hard to produce clean, high-quality prints, minor surface variations such as faint lines or tiny bumps are a normal part of the 3D printing process.

We do our best to minimize or prevent these flaws through careful printing and post-processing, but because every print is unique, a completely flawless surface cannot be guaranteed. Thank you for understanding and appreciating the handmade nature of 3D printed art!